VISTA®-128FBP/V128FBP-2
The new VISTA-128FBP provides the ultimate protection of life and property. This UL Listed commercial fire and burglary control panel supports up to eight partitions and up to 128 zones/points using hardwired, wireless and V-Plex® addressable technologies. A diverse line of Honeywell initiating devices, notification circuits, communication devices, keypads, RF receivers and relays are also supported. The VISTA-128FBP has been designed to mount quickly and easily in an attack resistant cabinet, and is available in 12V and 24V models.
MS-25(E) Rev. 2 – 25 Point Intelligent Control
The MS-25 is a 25-point fire alarm control panel designed to provide a cost-effective addressable solution to meet even the smallest specification. Unlike other small panels, the MS-25 is a full featured, addressable alternative…at a conventional panel price. It runs on only a single loop of standard wire, provides pin-point identification and includes maintenance alerts and auto-programming. The MS-25 supports any combination of its own HFS detectors and modules or equivalent Fire-Lite addressable devices.
Annunciator – ANN-100
The ANN-100 annunciator is a backlit, 80-character LCD fire annunciator that mimics the Fire Alarm Control Panel (FACP) display. It provides system status indicators for AC Power, Alarm, Trouble, Supervisory, and Alarm Silenced conditions. The ANN-100 and the FACP communicate over a two-wire serial interface employing the ANN-BUS communication format. Connected devices are powered, via two additional wires, by either the host FACP or a remote UL-listed, filtered power supply. ANN-100 is red. Approved for use in Canada.
Annunciators – ANN-80 Red
The ANN-80 annunciator is a compact, backlit, 80-character LCD fire annunciator that mimics the Fire Alarm Control Panel (FACP) display. It provides system status indicators for AC Power, Alarm, Trouble, Supervisory, and Alarm Silenced conditions. The ANN-80 and the FACP communicate over a two-wire serial interface employing the ANN-BUS communication format. Connected devices are powered, via two additional wires, by either the host FACP or a remote UL-listed, filtered power supply. ANN-80 is red.
Annunciator – ANN-80 White
The ANN-80 annunciator is a compact, backlit, 80-character LCD fire annunciator that mimics the Fire Alarm Control Panel (FACP) display. It provides system status indicators for AC Power, Alarm, Trouble, Supervisory, and Alarm Silenced conditions. The ANN-80 and the FACP communicate over a two-wire serial interface employing the ANN-BUS communication format. Connected devices are powered, via two additional wires, by either the host FACP or a remote UL-listed, filtered power supply. ANN-80 is red.
Annunciator – LCD-80F
The LCD-80F is a compact, 80-character, backlit LCD remote Fire Annunciator for use with the Fire•Lite MS-9200 Series and MS-9600 Series Fire Alarm Control Panels (FACPs). The LCD-80F displays complete system point status information and includes control switches for remote control of critical system functions.
System Sensor AV Notification Appliances
System Sensor’s AV notification devices are the most versatile, easy to install, and cohesive line of audible visible (AV) notification appliances in the industry. System Sensor greatly simplifies the specification, configuration, and installation of your notification project by providing a plug-in design, aesthetic and functional consistency, and field-adjustable settings across the entire line. Whether for fire alarm systems, emergency communications systems, mass notification systems, general signaling, directional sound, or voice evacuation systems, System Sensor enables you to save time and money while meeting the widest range of notification codes and requirements. Look for the L-Series products in the following subcategories: Accessories, Chimes, Chime Strobes, ECS and MNS, Horns, Horn Strobes, Speakers, Speaker Strobes, and Strobes.
HWF2A-COM / HWF2V-COM LTE Fire Communicators
Honeywell’s HWF2-COM Series LTE / IP fire communicators are single or dual path commercial fire alarm communicators that offer contact ID reporting with any fire alarm control panel (FACP) with a built in dialer. These easy to install communicators offer three selectable reporting paths which include LTE Cellular only, IP only, or IP primary/LTE cellular backup.
411/411UD Slave Digital Alarm Communicator
The Fire-Watch 411 series from Fire-Lite Alarms are compact slave Digital Alarm Communicator Transmitters (DACTs) that are designed for a variety of fire, and non-fire applications. They provide either three or four monitoring channels (inputs) respectively. These slave DACTs are a cost-effective solution for applications that require a Fire Alarm control panel to transmit system status to an off-site monitoring facility for central or Remote Station compliance.
Control Panel ES-200X
The Endurance Series ES-200X is a 198-point addressable fire alarm control panel that offers built-in dual path communications, programmable buttons and support for combined fire and CO addressable detection.
SD365 Series Addressable Photoelectric Smoke Detectors
The Fire-Lite SD365 Series addressable plug-in smoke detectors are designed for both performance and aesthetics. A new modern, sleek, contemporary design and enhanced optical sensing chamber are engineered to sense smoke produced by a wide range of combustion sources in accordance with more stringent code standards. Models include the SD365(A) photo detector, SD365T(A) photo thermal detector and SD365R(A) remote test capable detector for use with DNR(A)/DNRW. Available in both white (LiteSpeed protocol only) and ivory (CLIP and LiteSpeed protocols)
SD365CO Addressable Combination Fire/CO Detector
The SD365CO is an addressable combination fire and CO detector that can detect and send separate signals for fire and CO. This multi-criteria detector uses four sensing technologies (photoelectric, infrared, heat, and CO) to accurately detect fire and CO alarm conditions with a high immunity to false alarms. When paired with the B200S-WH sounder base or B200S-LF-WH low frequency sounder base, the SD365CO can generate unique alarms for fire and CO events (bases sold separately). Now available with a modern white finish and a 10-year CO cell. Compatible with the ES-50X & ES-200X addressable fire alarm control panels.
